1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the solid-state drives
4.
Remove the battery (see
5.
Remove the fans (see
6.
Remove the system board (see
Remove the display assembly:
1.
Lift the three pieces of tape that secure the antenna cables (1).
2.
Remove the antenna cables from their routing path in the computer (2).
3.
Remove the six Phillips M2.5 × 3.5 screws (1) that secure the display to the computer.
54
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
(Solid-state drive on page
Battery on page
37).
Fans on page
45).
System board on page
31).
32).
48).
31).