2. Install the:
a.
battery
b.
base cover
NOTE:
Installing of base cover is required only if the M.2 SSD module in slot 3 or 5 are accessed.
c.
SD card
3. Follow the procedure in
Coin-cell battery
Removing the coin cell battery
1. Follow the procedures in
2. Remove the:
a.
SD card
b.
base cover
c.
battery
d.
palmrest
3. To remove coin cell battery:
a. Disconnect the coin cell battery cable from the system [1].
b. Pry and lift the coin cell battery from the system [2].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
43