Solid State Drive; Removing The M.2 Solid State Drive-Ssd Module - Dell Precision 7530 Service Manual

2. Install the:
a. battery
b. base cover
c. SD card
3. Follow the procedure in

Solid State Drive

Removing the M.2 Solid State Drive—SSD module
1. Follow the procedures in
2. Remove the:
a. SD card
b. base cover
c. battery
3. To remove the M.2 SSD module (Slot 4):
a. Remove the single (M2.0x3.0) screw that secures the thermal plate to the system [1].
b. Slide and remove the thermal plate [2].
c. Remove the single (M2.0x3.0) screw that secures the M.2 SSD to the system board [3].
d. Remove the M.2 SSD from the system [4].
NOTE: Repeat the above steps for removal of other M.2 SSD installed (Slot 3 and 5).
After working inside your computer.
Before working inside your computer.
Removing and installing components 39