2. Install the:
a.
battery
b.
base cover
c.
SD card
3. Follow the procedure in
Smart card cage
Removing the smart card cage
1. Follow the procedure in
2. Remove the:
a.
SD card
b.
base cover
c.
battery
d.
keyboard
e.
hard drive
f.
palmrest
3. To remove power switch board:
a. Disconnect the smart card cage cable from the connector on the palmrest board [1].
b. Pry the smart card cage cable.
c. Remove the 2 (M2.0X3.0) screws that secure the smart card cage to the palmrest [3].
d. Remove the smart card cage from the palmrest [4].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
57