2. Install the:
a.
palmrest
b.
hard drive
c.
keyboard
d.
battery
e.
base cover
f.
SD card
3. Follow the procedure in
Graphics card
Removing the graphics card
1. Follow the procedure in
2. Remove the:
a.
SD card
b.
base cover
c.
battery
d.
keyboard
e.
hard drive
f.
palmrest
g.
heatsink assembly
3. To remove the graphics card:
a. Remove the 2 (M2.0x3.0) screws that secure the beam connector to the system board [1].
b. Remove the beam connector from the system board [2].
c. Remove the 2 (M2.0x5.0) screws that secure the graphics card to the system board [3].
68
Removing and installing components
After working inside your
computer.
Before working inside your
computer.