b. Replace the 2 (M2.0x3.0) screws to secure the touchpad button to the palmrest [2].
c. Connect the touchpad button cable to the connector in the touchpad [3].
2. Install the:
a.
palmrest
b.
hard drive
c.
keyboard
d.
battery
e.
base cover
f.
SD card
3. Follow the procedure in
SIM card
Removing SIM card
1. Follow the procedure in
2. Remove the:
a.
SD card
b.
base cover
c.
battery
3. To remove SIM card:
a. Gently slide the SIM card cover towards the rear of the system to unlock the SIM card cover [1].
CAUTION:
The SIM card cover is very fragile and can be easily damaged if it is not properly unlocked before
opening.
b. Filp the SIM card cover from the botton edge [2].
c. Lift the SIM card from the SIM card compartment [3].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
55