Interface Cable Connection
Remove/Insert Optical Module
If the optical module needs to be removed or inserted before connecting the cable,
follow the below process.
To remove optical module, do the following:
1
Figure 78.
Optical Module Removal (1)
[System Inside]
1
Optical
Module
2
2
Figure 79.
Optical Module Removal (2)
Optical Module
Cage
When desorbing an optical module, use a dedicated tool (optical module
desorption tool) to remove the handle by opening it for about 90º.
When the optical module is detached without using the dedicated tool, the optical
module may be jammed and the handle may be damaged due to a lack of opening
capacity of the minimum necessary handle.
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Hang the optical transceiver removal tool's hook on the optical module's bail
within the system.
Optical
Connector
Completely remove the optical module from the optical module cage by
pulling the optical module removal Tool.
Optical Module
Chapter 3 Connecting Cables
[Front View]
Removal Tool's Hook
Location to hang the
Optical Module
Removal Tool
Confidential
Optical Module
Removal Tool
Optical Module
Bail
Optical Module
Removal Tool
88