Figure 30. Drilling & Anchor (1) - Samsung MT3204 Series Installation Manual

Category
[Anchor Hole Cross Section]
[O]
2.2 in.
(55 mm)
* Remove the debris from the drilled hole.
1
Operator may drill after drill template is removed or remove the drill template after
drilling according to the installation site conditions.
2
Figure 30. Drilling & Anchor (1)
1
Anchor Bolt Hole
Vacuum Cleaner
[Drill Bit]
0.7 in.(17 mm)
3
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Anchor Bolt
[X]
Drill anchor holes at marked points with removing dust from the holes using a
cleaner.
Fix set anchor to the drilled hole.
Hammer Drill
Fix fasteners to anchor bolt temporarily.
Chapter 2 Installing System
Drill Bits
2
Hammer
Confidential
Hole Depth
0.7 in.
(17 mm)
Anchor Punch
M12 Anchor
Bolt
35