- For disconnecting the cap, pull the coupling nut to lower side.
Coupling
3
Figure 84.
Connecting CPRI Cable (3)
1
Cap
4
Before connecting the CPRI cable connector, the Ferrule of the connecter of cable
side should be cleaned first by using the optical connector cleaner. (Appendix B
for more information.)
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
1
Nut
Separate the cap from the cable side connector.
2
Cap
The latch of cable side connector should be toward the rear side.
3
2
Cap
3
Confidential
Chapter 3 Connecting Cables
4
Cap
DLC Plug
Cap
92