Taurus UB9.9 Touch Assembly And Operating Instructions Manual page 19

Step 8: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected to a power
board, otherwise it cannot be guaranteed that the
equipment will be supplied with sufficient power.
Technical errors can happen as a result.
Connect the power cable (66) to the unit and then plug
the power cable (66) into a socket which complies with
the specifications in the chapter on electrical safety.
To ensure that your equipment has the latest software version, please perform an update before
using it for the first time. Proceed as follows:
1. Tap "Settings" in the lower right corner of the screen.
2. Tap "Wireless" and connect your treadmill to the Internet.
3. Return to the settings.
4. Tap "System and Apps" and go to updates.
5. Tap "Update", to update the software.
Do not use or switch off the equipment during the update.
Check whether another update is available and carry it out as described above at regular
intervals. If a new version is available, the display shows a white icon. Otherwise the icon will
be grey.
66
1
66
IMPORTANT NOTE
L
48L
19