Disassembly Of Front Cover Unit - Canon MV750i E Service Manual

1-10 Disassembly of Front Cover Unit - 1

(1) Remove two screws (c × 2), disconnect the CN43, and detach the JACK P.C.B.
(2) Disconnect the CN51, and detach the JACK-MAIN FPC from the JACK P.C.B.
(3) Disengage the claws A and B, and detach the Jack Cover and F Jack Cover.
(4) Remove three screws (e × 3), and detach the Shoe Base and Lens Ring.
<Note on Reassembling>
(1) Before using a service part of JACK-MAIN FPC, process it so as to bend permanently as illustrated.
(2) For mounting the JACK P.C.B., insert the JACK side into the Front Cover, and mount it with the JACK-MAIN FPC kept bent.
(3) Mount the MIC Ass'y Cable on CN43, and then push it in part C.
JACK Cover
Claw A
(3)
Lens Ring
F JACK Cover
Note on Reassembling (3)
CN43
MIC Ass'y Cable
Part C
Shoe Base
(4)
(4)
(3)
Claw B
Note on Reassembling (2)
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
(4) - e
CN43
(1)
Note on Reassembling (1)
Fig. 9
12
DISASSEMBLING
JACK P.C.B.
(1) - c
CN51
(1)
JACK-MAIN FPC
c e
4.5mm
6mm
Metal
Metal
M1.7
M1.7
(self tap)
(self tap)
Outer fold
Inner fold
JACK-MAIN FPC