Canon MV750i E Service Manual page 73

CARD ERROR
• When a card error occurs and data cannot be recorded on the card (for MV750i E, MV730i E model).
CARD FULL
• When the card is full (for MV750i E, MV730i E model).
NAMING ERROR
• When the maximum number of file numbers and directory numbers are created (for MV750i E, MV730i E model).
UNIDENTIFIABLE IMAGE
• When an attempt is made to playback an image in an unplayable format, an incompatible JPEG image, or an image with corrupt
data (for MV750i E, MV730i E model).
PRINT ORDER ERROR
• When there are too many print marks (100 or more), or when a mark file cannot be edited (for MV750i E, MV730i E model).
NO CARD
• When there is no card in the camcorder socket (for MV750i E, MV730i E model).
NO IMAGES
• When there are no images to be played in the card (for MV750i E, MV730i E model).
THE CARD IS SET FOR ERASURE PREVENTION
• When an attempt is made to record on an SD card set for erasure prevention, in a mode that allows card recording (VCR mode,
Card Recording mode) (for MV750i E, MV730i E model).
NOW CREATING START-UP IMAGE
• The startup image is being written to flash memory (for MV750i E, MV730i E model).
THIS IMAGE CANNOT BE USED AS START-UP IMAGE
• (Models MV750i E, MV730i E)
IN CARD POSITION
• When Start/Stop button is pressed in the Camera mode (for MV750i E, MV730i E model).
THIS IMAGE CANNOT BE RECORDED
• (Models MV750i E, MV730i E)
DIFFERENT CARD FORMAT
• When the card format is not supported by the camcorder (for MV750i E, MV730i E model).
PAPER ERROR
• When there is a problem with the paper (for MV750i E, MV730i E model).
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
GENERAL DESCRIPTION OF PRODUCT
71