<Notes on Reassembling>
(1) Do not disfigure the LCD Bottom Cover Sheet.
(2) Mount the LCD Spring as illustrated.
(3) Insert a flexible cable into CN901 as illustrated.
(4) Mount the LCD Top Cover as illustrated.
Note on Reassembling (1)
LCD Bottom Cover Sheet
Note on Reassembling (2)
LCD Spring
LCD Holder
LCD Bottom Cover
Insert the LCD Spring E between
LCD Bottom Cover and LCD Holder to mount.
Note on Reassembling (3)
Slide to introduce
Note on Reassembling (4)
E
LCD Top Cover
Claw A
Insert the rib of LCD Top Cover between LCD Bottom
Sheet and LCD P.C.B., and engage claws A to D in this
order. Tighten screws pressing the LCD Top Cover
against LCD Bottom Cover.
Fig. 19
22
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
Match the contour
Rib
Claw B
LCD Bottom Cover Sheet
DISASSEMBLING
CN901
Claw D
Claw C
LCD P.C.B.
LCD Bottom Cover