Separation Of Front Cover Unit - Canon ZR70 MC A Service Manual

1-11 Separation of Front Cover Unit

(1) Remove three screws (d × 3) and detach the Lens Cover, L Jack Cover and F Jack Cover.
(2) Remove two screws (d × 2) and detach the Microphone Cover, Rubber, Microphone Ass'y and Microphone Shield.
<Note on Reassembling>
(1) Treat the Microphone Ass'y Cable as illustrated below.
Front Cover Unit
L Jack Cover
(1)
(1)
Lens Cover
F Jack Cover
d
4.5mm
Metal
M1.7
(self tap)
(1)
Fig. 4-10
CHAPTER 4. DISASSEMBLING ADJUSTMENT
(1) - d
Black/
Red
Black/
White
MIC Ass'y
MIC Shield
Note on Reassembling (1)
Black/Red
Take care to make the four cables come
out of the front cover in line so as to
prevent them from crossing each other.
4-11
ZR70 MC A, ZR65 MC A, ZR60 A
(2) - d
Rubber
MIC Holder
(2)
Black/White