1-27 Disassembly of CVF Unit - 4
(1) Remove a screw (k × 1), and detach the CVF Knob, Rubber and CVF Lens Holder.
(2) Disengage two claws A, and detach the Lens.
<Notes on Reassembling>
(1) Pay attention to the orientation of the Lens when mounting it on the CVF Lens Holder.
(2) When mounting the CVF Knob, engage the dowel of CVF Lens Holder as illustrated. Do not fail to position the Rubber.
<Instruction for Supply>
CVF Inner Cover inside, 8 sliding parts : Hanarl KS-39M (DY9-3053-000)
Rubber top surface : Hanarl KS-39M (DY9-3053-000)
(1)
Note on Reassembling (2)
Rubber
CVF Lens Holder
(1) - k
CVF Knob
CVF Lens Holder
Rubber
(1)
CVF Inner Cover
Instruction for Supply
CVF Knob
Rubber top surface
Hanarl : KS-39M
Fig. 30
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
Lens
(2)
Note on Reassembling (1)
Claw A
CVF Inner Cover
Sliding parts of rail
Sliding parts of rail
33
DISASSEMBLING
k
2.3mm
Metal
M1.7
Stepped Screw
CVF Lens Holder
Lens