Canon MV750i E Service Manual page 112

1-15 Disassembly of R-LCD Unit - 2
(1) Disengage the claw A, and detach the D SW FPC Ass'y and Speaker.
Note : Take care not to damage the switch lever of the D SW FPC Ass'y.
(2) Unsolder two points (α), and detach the Speaker from the D SW FPC Ass'y.
(3) Remove two screw (i × 2), and detach the RH Cover and LCD Unit.
<Note on Reassembling>
(1) For mounting the RH Cover, pass the LCD FPC Ass'y to the part A.
(2) Before using a service part of D SW FPC Ass'y, process it so as to bend permanently at the illustrated position.
(3) With the LCD Unit open as illustrated, engage the claw A of the D SW FPC Ass'y, pass it under the part B, and mount it on the
dowel C.
i
5.5mm
Metal
M1.7
(self tap)
Note on Reassembling (1)
RH Cover
Part A
LCD FPC Ass'y
Note on Reassembling (2)
Solder point
Speaker
LCD Unit
(3) - i
(3)
Note on Reassembling (3)
D SW FPC Ass'y
Part B
Inner fold
Fig. 15
18
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
Note
Right Cover Unit
The lever part of SW.
RH Cover
(3)
D SW FPC Ass'y
Speaker
D SW FPC Ass'y
DISASSEMBLING
(3) - i
Claw A
(1)
Claw A
(2) - α
Claw A
LCD FPC Ass'y
Dowel C