Color Balance Adjustment; Wb Adjustment (2) - Canon MV750i E Service Manual

MOVIE

5-4-3 Color Balance Adjustment

CHART Lightbox (5600°K), and color bar chart
M.EQ. Vectorscope
TP/TRIG. VIDEO OUT
R : × 2.0 (ratio to burst) 90°, Ye : × 1.0 (ratio to burst) 180°
SPEC.
Procedure)
(1) For manual adjustment of color balance, change data at the following four addresses while observing a vectorscope.
ST EP PROCEDURE
CB (MANUAL)
R GAIN 1) In the setting shown at right, adjust relevant data.
2) Perform storing.
(press the PAUSE button.)
Ye GAIN 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
Ye PHASE 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
R PHASE 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)

5-4-4 WB Adjustment (2)

CHART Light box (5600°K), and CCA12 filter
SPEC. Automatic adjustment
Procedure)
(1) Referring to the table shown below, carry out WB adjustment (2).
ST EP PROCEDURE
WB (2)
1 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
CS Function MD ADDR DT
2
↑
↑
↑
↑
↑
↑
↑
MONIT OR
CS Function MD ADDR DT
2 08 ST 3004 00
WR
↑ ↑ ↑ ↑
RD
↑ ↑ ↑
19
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
SERVICE MODE · ADJUSTMENT
MONIT OR Microcomputer operation
08 ST 3007 "ADJ" Adjustment is in progress.
RD ADJ Adjustment is completed.
↑ ↑
ST 3008 "ADJ" Adjustment is in progress.
↑
RD ADJ Adjustment is completed.
↑ ↑
ST 3009 "ADJ" Adjustment is in progress.
↑
RD ADJ Adjustment is completed.
↑ ↑
↑ ST 300A "ADJ" Adjustment is in progress.
↑ RD ↑ ADJ Adjustment is completed.
Microcomputer operation
ST
Adjustment is in progress.
05 Adjustment is completed.
Completion with ST :05 (ST :09 NG)