MOVIE
5-7 Recorder Section Adjustment
Note)
(1) Each of the adjustment data (5-7-0 to 5-7-3) becomes valid when 5-7-4 flash memory writing is made. When turning power OFF/
ON during each adjustment, be sure to carry out 5-7-4 flash memory writing.
Preparation)
(1) Except for the tape-path adjustment, carry out adjustment in the product state.
5-7-0 Setting for Destination
SPEC.
Automatic writing
Procedure)
(1) Referring to the table shown below, carry out the setting for destination market place.
ST EP PROCEDURE
1
1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
Note) For only MV690 E, perform this adjustment. Do not perform for the other models.
5-7-1 SWP Adjustment
MODE
Playback of color bar master (DY9-1381-000)
SPEC.
Automatic adjustment
Procedure)
(1) While playing back the color bar master, carry out SWP automatic adjustment referring to the table shown below.
ST EP PROCEDURE
SWP (AUT O)
1
1) Make the setting shown at right .
2) Perform storing.
(press the PAUSE button.)
MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
MONIT OR
CS Function MD ADDR DT
1
10
ST
014D
01
RD
↑
↑
↑
↑
MONIT OR
CS Function MD ADDR DT
0
08
ST
0001
--
WR
↑
↑
↑
↑
RD
↑
↑
↑
↑
23
SERVICE MODE · ADJUSTMENT
Microcomputer operation
MV690 E ONLY
Data writing
Microcomputer operation
Automatic adjustment is in progress.
Automatic adjustment is completed.