Ordering Information; Specifications - Enttec Pixel Octo User Manual

Can you run tapes and dots at the same time?
No, only one LED protocol can be selected to drive
the output at a given time
What is the minimum DC voltage for powering Pixel
Octo?
The minimum DC voltage is 4V

Ordering Information

Part Number
71520
10 December 2019
Description
Pixel Octo
M-files ID: 4836041

Specifications

Item
Input Voltage 4-60V DC
Maximum Power
5W
consumed
Supported
Protocols
For supported protocols, please
refer
Output Protocols
www.enttec.com/support/support
ed-led-pixel-protocols/
Maximum Pixel
count/output 512 RGBW pixels
(RGBW)
Maximum Pixel
count/ output 680 RGB pixels
(RGB)
Maximum DMX
2048 channels
footprint/output
2 x 4Pin Output phoenix
Connectors 1 X 2Pin Power In
2 X RJ45
IP Rating IP 20
Operating
-10
Temperature
Relative
5- 95% (non-condensing)
Humidity
Weight of device
0.25 kg
(In kg)
Dimensions (in
103 (L) x 69 (W) x 58 (H)
mm)
Due to continuous improvements and innovations
of all ENTTEC products, specifications and features
are subject to change without notice.
Pixel Octo User Manual
For latest version visit:
www.enttec.com
Specification
Art-Net sACN
KiNET ESP
to support
o C to 60 o C
page:
Page|14