Kinet; Update Firmware; Reset To Factory Defaults; Using Web Interface - Enttec Pixel Octo User Manual

KiNET

The information provided is:
•
Total packets received
•
Discover supply packets received
•
Discover ports packets received
•
DMXOUT packets
•
KGet packets
•
KSet packets
•
PORTOUT Packets
•
Set device name packet received
•
Set device IP packet received
•
Set universe packets received
•
Last IP received from
•
Last port data received from
10 December 2019

Update Firmware

It is strongly recommended that Pixel Octo is
updated with the latest firmware, available on the
ENTTEC website. This firmware can be loaded to the
driver through its web interface by carrying out the
following steps:
1. Browse and select the correct firmware
version on your PC
2. Press the Update Firmware button
Once the firmware update is complete, the device
will reboot while the web interface displays the
message shown in the image below

Reset to Factory Defaults

Using Web Interface

The reset to defaults command can be found under
the Settings tab of the Pixel Octo.
Once the command is pressed, a pop-up would
appear as shown in the image below:
M-files ID: 4836041
Pixel Octo User Manual
For latest version visit:
www.enttec.com
Page|12