Subscribe to Our Youtube Channel
Related Manuals for SIIG AV-GM04D3-S1
Summary of Contents for SIIG AV-GM04D3-S1
- Page 1 HDMI Extender over Dual Cat.X with RS-232 & Bi-directional IR To avoid EMI issue, complete STP Cat6 cable is strongly recommended! P/N: AV-GM04D3-S1...
-
Page 2: Table Of Contents
However, like all electronic equipments, the AV-GM04D3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 3: Introduction
This bonus feature allows users to boost IR control distance up to 100m (330 ft) and makes IR control possible through only single CAT-5 type cable including HDMI signals. Furthermore, AV-GM04D3-S1 is equipped with a popular serial control path RS-232. With high definition digital signal and serial control, AV-GM04D3-S1 makes your digital signage application with the upmost performance in pure digital domain. -
Page 4: Specifications
The claimed transmission distance here is subject to the grade of installed cable(s), source device and display. For over Cat.X/COAX transmission, the cable(s) has to be solid, not stranded. Any keystone jack along the transmission path will kill the transmission performance significantly! SPECIFICATIONS Model Name AV-GM04D3-S1 Technical AV-GM04D3-S1[Tx] AV-GM04D3-S1[Rx] Role of usage Transmitter [TX]... -
Page 5: Package Contents
Storage temperature -20~60°C [-4~140°F] Relative humidity 20~90% RH [no condensation] PACKAGE CONTENTS ● 1x AV-GM04D3-S1 [TX & RX] ● 2x IR blaster ● 2x IR receiver ● 2x DC 5V 2A wall wart ● 1x User Manual PANEL DESCRIPTIONS Transmitting unit ►... -
Page 6: Receiving Unit
Mode Strongest EQ to Weakest EQ TX&RX Extender Mode – TxD1 of AV-GM04D3-S1-TX is connected to TxD of AV-GM04D3-S1-RX 0 > 1 > 2 >3 > 4 > 5 > 6 > 7 RxD2 of AV-GM04D3-S1-TX is connected to RxD of AV-GM04D3-S1-RX Master to Slave Mode –... - Page 7 AV-GM04D3-S1-RX RxD of AV-GM04D3-S1-TX is connected to TxD of AV-GM04D3-S1-RX 1. TxD: The 3 pin of RS-232, which is in charge of sending data 2. RxD: The 2 pin of RS-232, which is in charge of receiving data RS-232: Connect to a RS-232 enable device or Touch panel with serial port control...
-
Page 8: Connection Diagram
CONNECTION DIAGRAM... -
Page 9: Hardware Installation
1. Connect a HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit AV-GM04D3-S1-TX. 2. Connect a HDMI or DVI display (such as a LCD TV) to the receiving unit AV-GM04D3-S1-RX. 3. Connect IR Blaster/Receiver to both TX and RX units. -
Page 10: Ir Pass-Through
IR PASS-THROUGH IR Extenders IR Blaster IR Receiver IR Sockets IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the other enf to control the devices corresponding to the IR signals. IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of the corresponding devices. -
Page 11: Rj45 / Cat5 Pin Definition
RJ45 / CAT5 PIN DEFINITION Audio/Video Port Control Channel Port... -
Page 12: Notice
NOTICE 1. When adjusting the signal level on the receiver unit, please dial the rotary control switch from MIN to MAX or F to 8 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! 2. -
Page 13: Warranty
The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the AV-GM04D3-S1 features and specifications is subject to change without further notice.
Need help?
Do you have a question about the AV-GM04D3-S1 and is the answer not in the manual?
Questions and answers