Labels & Cosmetics - Grizzly G0898 Owner's Manual

BELT ROTATION
101
104
105
REF PART # DESCRIPTION
101 P0898101 BELT ROTATION LABEL
102 P0898102 MACHINE ID LABEL
103 P0898103 DOOR CLOSED LABEL
104 P0898104 TOUCH-UP PAINT, GRIZZLY BEIGE
105 P0898105 GRIZZLY NAMEPLATE-MINI
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-36-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
Specifications
To reduce the risk of serious injury while using this machine:
Motor: 1 HP, 110V, Single-Phase, 60 Hz
1. Read and understand owner's manual before operating.
Prewired Voltage: 110V
2. Always wear approved eye protection and respirator.
Full-Load: 11A at 110V, 5.5A at 220V
3. Only plug power cord into a grounded outlet.
Sanding Belt Size: 2" x 48"
4. Support workpiece with a backstop or workrest.
Sanding Belt Speed: 4000 FPM
5. Maintain 1/16" maximum clearance between table and sandpaper.
Sanding Belt Tilt: 0°–90°
6. Never touch moving sandpaper.
Table Tilt: 0°–90°
7. Always grind in accordance with directional arrows on machine.
Drive Wheel Size: 6"
8. Make sure grinder is properly assembled, adjusted, and stable before
Contact Wheel Size: 7"
operating. Only operate with all guards in place.
Platen Size: 2" x 5-7/8"
9. Never grind pointed stock with point facing into belt rotation, and never
Weight: 95 lbs.
102
force workpiece into grinding surface.
10. Do not grind in a flammable environment or near combustibles.
11. Only remove jammed pieces when sandpaper is stopped.
12. Turn motor OFF and disconnect power before changing sandpaper,
making adjustments, or servicing.
13. Do not wear loose clothing, gloves, jewelry, or other articles that can get
entangled. Tie back long hair and roll up sleeves.
14. Never reach over moving grinding belt.
15. Do not expose to rain or use in damp locations.
16. Do not operate under influence of drugs or alcohol, or when tired.
17. Prevent unauthorized use by children or untrained users; restrict access
or disable machine when unattended.
KEEP DOOR
CLOSED
103
WHILE
OPERATING!
107
WARNING!
ABRASION
INJURY HAZARD!
DO NOT touch moving
sanding belt or
personal injury may
occur!
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
EYE/LUNG
INJURY HAZARD!
Always wear
ANSI-approved safety
glasses, face shield, and
respirator when using
this machine.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
108
REF PART # DESCRIPTION
106 P0898106 MANUAL/PPE/ENTANGLEMENT LABEL
107 P0898107 ABRASION INJURY LABEL
108 P0898108 TOUCH-UP PAINT, GRIZZLY GREEN
109 P0898109 DISCONNECT POWER LABEL
110 P0898110 ELECTRICITY LABEL
Model G0898 (Mfd. Since 12/19)
106
109
110