Function Keys - ProMinent Dulcodes M Operating Instructions Manual

Controller
Page 8
4.2

Function Keys

System
Off
DULCODES
STOP
START
START/STOP
STOP
START
CHANGE
BACK
DOWN
UP
ENTER
NOTE
• Keep the START/STOP key depressed for at least 2 seconds each time.
• If none of the keys are pressed for 5 minutes, the display returns to the normal
operating status display automatically.
Fig. 1: Display and control unit
Switches the UV system on and off
In operating mode: changes the display window
In programming mode: changes the parameter to be set
Returns to the previous level in the menu
In programming mode: reduces the numerical value displayed
and changes a setting
In programming mode: increases the numerical value displayed
and changes a setting
In operating mode: changes to programming mode, triggers
an attempt to ignite the lamp during the
cooling period and acknowledges a fault
In programming mode: sets a value or status
Graphical display
Function keys
®
ProMinent