Maximum Safety - RC-Plus PLUS POWER 80 Instruction Manual

FEATURES

Maximum safety

Delta-peak sensitivity: The automatic charge termination program works on the
principle of the Delta-peak voltage detection.(NiCd/NiMH)
Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you
can set the upper limit of change current to avoid from high current charging. This is
very useful when charging the low impedance and small capacity NiMH battery in
'AUTO' mode.
Capacity limit: The changing capacity always calculated by multiple of the charging
current and time. If the charging capacity exceeds the limit the process will be termi-
nated automatically when you set the maximum value.
Temperature limit: The temperature of the battery on charging will rise by its internal
chemical reaction. If you set the limit of temperature the process will be expired forcibly
when the limit has reached.
Processing time limit: you can also restrain the maximum process time to prevent
from any possible defect.
Input power monitor: To protect the car battery using as input power from being dam-
aged the voltage of it always monitored. If it drops below the lower limit the process
will be ended automatically.
Automatic cooling fan: The electric cooling fan comes into action automatically only
when the internal temperature of the unit is raised.
Data store/load
For users convenience it can store maximum 5 data of different batteries. You can
establish the data contains program setting of the battery to charge or discharge
continually. These data can be called out at any time you need and the process can be
executed without program setting.
Cyclic charging/discharging
Perform 1 to 5 cycles of charge>
9