RC-Plus PLUS POWER 80 Instruction Manual page 22

13. Warning and error messages
WARNIG / ERROR MESSAGES
13. Warning and error messages
It incorporates a various functions of protective and monitoring the system to verify functions and the state of
It incorporates a various functions of protective and monitoring the system to
its electronics. In any case of occurring error, the screen displays the cause of error that is self- explanatory
verify functions and the state of its electronics. In any case of occurring error, the
It incorporates a various functions of protective and monitoring the system to
with audible sound.
screen displays the cause of error that is self- explanatory with audible sound.
verify functions and the state of its electronics. In any case of occurring error, the
screen displays the cause of error that is self- explanatory with audible sound.
The external temperature only will be displayed when
The external temperature only will be displayed when using the
using the thermal probe.
The external temperature only will be displayed when
thermal probe.
using the thermal probe.
The present voltage of input DC power.
The present voltage of input DC power.
The present voltage of input DC power.
Using the individual connection cable to the battery, you can check
Using the individual connection cable to the battery,
the individual voltage of each cell in the battery pack. When connect
you can check the individual voltage of each cell in the
Using the individual connection cable to the battery,
the cable to the port on the right side of the charger the program
battery pack. When connect the cable to the port on
you can check the individual voltage of each cell in the
shows the voltage of each cells for maximum 6 cells in sequence.
the right side of the charger the program shows the
battery pack. When connect the cable to the port on
To utilise this feature, the battery pack must have output connector
voltage of each cells for maximum 6 cells in sequence.
the right side of the charger the program shows the
that linked to each cells.
To utilise this feature, the battery pack must have
voltage of each cells for maximum 6 cells in sequence.
output connector that linked to each cells.
To utilise this feature, the battery pack must have
output connector that linked to each cells.
The output is connected to a battery with incorrect
polarity.
The output is connected to a battery with incorrect
The output is connected to a battery with incorrect polarity.
polarity.
This will be displayed in case of detecting an
interruption of the connection between battery and
This will be displayed in case of detecting an
This will be displayed in case of detecting an interruption of the con-
output or voluntarily disconnecting the charge lead
interruption of the connection between battery and
nection between battery and output or voluntarily disconnecting the
during the operation of charge or discharge on output.
output or voluntarily disconnecting the charge lead
charge lead during the operation of charge or discharge on output.
during the operation of charge or discharge on output.
There was a short-circuit at OUTPUT. Please check
the charging leads.
There was a short-circuit at OUTPUT. Please check the charging
There was a short-circuit at OUTPUT. Please check
the charging leads. leads.
The voltage of input power drops below the limit.
The voltage of input power drops below the limit.
The voltage of input power drops below the limit.
The voltage of Lithium battery pack was selected
incorrectly. Verify the voltage of battery pack carefully.
The voltage of Lithium battery pack was selected
The voltage of Lithium battery pack was selected incorrectly.
incorrectly. Verify the voltage of battery pack carefully.
Verify the voltage of battery pack carefully.
22