Using The Scales - Bosch OptiMUM MUMPCV4S12 Instruction Manual

10. "SENSOR CONTROL PLUS" appears
on the display. SensorControl Plus
monitors the processing.
11. Once the pre-programmed consistency
has been achieved, an acoustic signal
will sound and processing will stop.
"FINISH" appears on the display.
Note: Setting the acoustic signal
X "Settings" see page 26
12. The rotary switch automatically switches
to y. "OptiMUM" appears on the
display.
13. Disconnect the mains plug.
14. Processing with the "EGG WHITE"
function is ended.
15. Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 33

Using the scales

Depending on the model in question, the
appliance may be equipped with scales.
The following applications are possible:
– Weighing the added ingredients
(either each ingredient individually or all
ingredients together).
– Pre-setting a desired weight and
counting down until sufficient ingredients
have been added (with audible
information signals).
Important:
– The scales display the weight in 5 g
steps (0.01 lb). If less than 5 grams
(0.01 lb) are added, the scales will not
provide correct measurement results.
– The appliance has 4 weight sensors
in the feet. The scales only supply
the correct results if all of the feet are
standing on a solid and level surface.
Do not put any cloths or other items
underneath.
– The worktop must not be subject to any
vibrations while the scales are being
used (e.g. by other activities or other
appliances).
– Do not slide the appliance about on
the work surface as this may impair the
functioning of the scales. To move the
appliance, lift it.
– After switching on or resetting the
scales, they are calibrated for a brief
moment (tare). During this process, do
not touch the appliance or place any
items on top of it (e.g. wooden spoon,
tea towel etc.).
– Ensure that measuring jugs or
packaging are not lying on top of the
appliance (e.g. on the edge of the
filling shaft).
Weighing ingredients
X Image sequence K
1. Prepare the base unit.
2. Plug the mains plug into the mains.
"OptiMUM" appears on the display.
3. Press button C and don't touch the
appliance again.
Individual dashes appear one after each
other on the display during calibration:
"– – – – –" (tare).
4. "0 g" or "0.00 lb" appears on the display
(depending on the setting). The scales
are ready.
5. Add ingredients. The scales display the
weight.
6. Start processing or put out other
ingredients ready for use.
7. Press button C and do not touch
the appliance again. "0 g" or "0.00 lb"
appears on the display (depending on
the setting). The scales are ready.
8. Add all desired ingredients and weigh
them in this manner.
Process the weighed ingredients. X "Using
without additional functions" see page 27
Note: If button C is pressed while
processing food, "FOR SCALE
STOP MACHINE" appears on the display.
Using the scales en
31