Using Without Additional Functions - Bosch OptiMUM MUMPCV4S12 Instruction Manual

– UNITS (for models with scales)
Unit of display for the scales – grams (g)
or pounds (lb).
Changing and saving settings
■ The current setting is changed using the
button + or -.
■ Press and hold buttons A and +
simultaneously until "SETUP SAVED"
briefly appears on the display.
■ Release buttons A and + again.
The changed settings are saved.
Example: Setting the language
■ Press and hold buttons A and + at the
same time until the configuration menu
is opened.
■ Release buttons A and + again.
■ Keep pressing button A until the
language selection appears.
LANGUAGE
ENGLISH
■ Press the button + or - repeatedly
until the desired language is displayed.
■ Press and hold buttons A and +
simultaneously until "SETUP SAVED"
briefly appears on the display.
SETUP
SAVED
■ The language selection is shown on the
display.
■ Release buttons A and + again.
The language selection is saved.
■ Hold down one of the function buttons
(D/A/C) until "OptiMUM" appears on
the display. The appliance is ready to
use.
Note: If the appliance is switched on
with the rotary switch, the menu is exited
immediately.

Using without additional functions

Using without additional
functions
W Risk of injury!
– Do not insert the mains plug until
all preparations for working with the
appliance are complete.
– While operating the appliance, never
reach into the bowl or filling shaft.
– Do not operate the appliance without
the cover in place.
– Always wait for the drive to come to a
standstill before moving the swivel arm
or changing tools.
– For safety reasons, always fit the
protective drive covers on the front and
rear drive.
Important:
– Prepare the base unit as described
under "Preparation".
– The appliance cannot be switched on
unless the bowl has been inserted
correctly.
Note: The function "TIME" starts
automatically with every use, counts the
ongoing processing duration and indicates
this on the display.
X Image sequence F
1. Depending on the processing task,
select the professional flexible beating
whisk, professional stirring whisk
or kneading hook X "Tools" see
page 25. Insert the tool into the main
drive until it locks into place. The drive is
then covered by the protective cap.
2. Put the ingredients to be processed in
the bowl.
3. Press the release button and push the
swivel arm down until it locks into place.
W Risk of injury!
Carefully lower the swivel arm! Make
sure you do not get your hands or fingers
caught.
en
27