HMS Networks Anybus Wireless Bolt User Manual page 35

Appendix A: Configuration Examples
3. In WLAN Settings, set Operating Mode to Access Point.
Fig. 29 WLAN Settings
4. Enter a unique SSID (network name) for the new wireless network.
5. Set Authentication Mode to WPA2 and enter a passkey.
6. Select a Channel band and a Channel.
7. Click on Save and Reboot.
You should now be able to connect to the SSID of the Wireless Bolt on your handheld device and
access the PLC by by entering its IP address in a browser.
® ™
Anybus Wireless Bolt User Manual
33 (40)
SCM-1202-007 2.8 en-US