HMS Networks Anybus Wireless Bolt User Manual page 26

Configuration
4.2.11 AT Commands
Fig. 18 AT Commands
Fig. 19 AT Commands
AT commands can be used for setting advanced parameters that are not accessible in the web
interface, to read out parameters in text format, and for batch configuration using command
scripts.
Enter or paste the commands into the text box, then click on Send. The result codes will be
displayed below the text box.
Click on Help for a complete list of supported AT commands.
® ™
Anybus Wireless Bolt User Manual
24 (40)
SCM-1202-007 2.8 en-US