Factory Restore - HMS Networks Anybus Wireless Bolt User Manual

Configuration
4.3

Factory Restore

Any one of these actions will restore the factory default settings:
• Clicking on Factory Restore on the System Settings page
• Executing Easy Config Mode 2
• Issuing the AT command AT&F and then restarting the unit
• Holding RESET pressed for >10 seconds and then releasing it
• Applying voltage to the digital input for >10 seconds
Default Network Settings
IP Assignment
IP Address
Subnet Mask
Default Gateway
Internal DHCP Server
Default WLAN Settings
Operating Mode
Channel Bands
Authentication Mode
Channel
Bridge Mode
Default Bluetooth Settings
Operating Mode
Local Name
Connectable
Discoverable
Security Mode
Bluetooth LE
® ™
Anybus Wireless Bolt User Manual
Static
192.168.0.99
255.255.255.0
192.168.0.99
Disabled
Client
2.4 GHz & 5 GHz
WPA/WPA2–PSK
Auto
Layer 3 IP forward
PANU (Client)
[generated from MAC address]
No
No
Just works
Disabled
26 (40)
SCM-1202-007 2.8 en-US