Table of Contents
Advertisement
Configuration
4
Configuration
4.1
General
Anybus Wireless Bolt should normally be configured via the web interface. Parameters can be set
individually or using one of the pre-configured Easy Config modes.
The web interface is accessed by pointing a web browser to the IP address of the Wireless Bolt.
The default address is 192.168.0.99. The computer accessing the web interface must be in the
same IP subnet as the Wireless Bolt.
Fig. 5
Web interface
Advanced configuration can be carried out by issuing AT (modem) commands through the web
interface or over a Telnet or RAW TCP connection to port 8080. See the AT Commands Reference
Guide or the Help page in the web interface for more information.
®
™
Anybus
Wireless Bolt
User Manual
10 (40)
SCM-1202-007 2.8 en-US
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus Wireless Bolt and is the answer not in the manual?
Questions and answers