HMS Networks Anybus Wireless Bolt User Manual page 21

Configuration
4.2.6 Bluetooth Settings – General
Fig. 11 Bluetooth Settings
Enable
Operating Mode
Local Name
Connectable
Discoverable
Security Mode
Paired Devices
® ™
Anybus Wireless Bolt User Manual
Enable/disable the Bluetooth interface.
PANU (Client) = The unit will operate as a Bluetooth PAN (Personal Area Network) User
device. It can connect to another single Bluetooth PANU device or to a Bluetooth
Network Access Point.
NAP (Access Point) = The unit will operate as a Bluetooth Network Access Point. It can
connect to up to 7 Bluetooth PANU devices.
Identifies the unit to other Bluetooth devices. If left blank, the unit will use a default
name including the last 6 characters of the MAC ID.
Enable to make the unit accept connections initiated by other Bluetooth devices.
Enable to make the unit visible to other Bluetooth devices.
Disabled = No encryption or authentication.
PIN = Encrypted connection with PIN code security. This mode only works between two
units of this type and brand (not with third-party devices). PIN codes must consist of 4 to
6 digits.
Just Works = Encrypted connection without PIN code.
Lists the currently connected Bluetooth devices.
19 (40)
SCM-1202-007 2.8 en-US