Advertisement
Quick Links
Kuranda Cabinet - Large
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
long
magnetic
bolt
screw x12
x1
I
H
magnetic
Allen key
shelf plug
bar x2
x1
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
C
locking
small
x8
nut x8
screw x4
K
J
L
door plug
wedge
x4
x4
x8
Hardware Supplied
Phillips & Flathead screwdrivers
required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
F
handle
handle
x2
screw x4
M
N
screw
felt
x8
pad x4
V
W
X
safety
screw
wall
x2
strap x2
anchor
x2
Wall Strap
Y
Z
wall
washer
screw
x4
x2
1
Advertisement
Related Manuals for Mocka Kuranda Cabinet
Summary of Contents for Mocka Kuranda Cabinet
- Page 1 Phillips & Flathead screwdrivers required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver. Attach 4x bolts (C) and 1x magnetic (B) to panel [2] with 2x small screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panels [3] and [4] to panel [5], secure with Slide panel [6] along the grooves between the panels [3] and [4]. 4x long screws (A).Tighten with an allen key (I). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panel [1] to panels [3] and [4], secure with 4x locking nut (D). Slide panel [6] along the grooves between the panels [3] and [4]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panel [2] to panels [3] and [4], secure with 4x long screws (A). Attach panel [9] to panels [7] and [8], secure with 4x long screws (A). Tighten with an allen key (I). Tighten with an allen key (I). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Attach panels [10] together with connect stick [11]. Slide panels [10] Tighten with a screwdriver. Attach 4x felt pads (N) to panels [7] and [8]. along the grooves between the panels [7] and [8]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Press door plugs (K) and attach doors [12] and [13] to panels [2] and [9]. with 2x small screws (E). Tighten with a screwdriver. Insert 4x Make sure the door open and close easily. door plugs (K) to doors [12] and [13] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Insert 4x shelf plugs (J) into the unit at the desired height for the shelves screws (G) and tighten with a screwdriver. and rest the shelf panels [14] onto them. Ensure the shelves are balanced and stable. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 2x wall anchors (X) and 2x wall screws (Y), 2x washers (Z). washers (Z). Tighten with a screwdriver. Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Kuranda Cabinet and is the answer not in the manual?
Questions and answers