Step 4-Install The Line Cards - Juniper PTX10008 Quick Start Manual

Figure 8: Attaching the Chassis Flanges to the Rack
6. Move the lift away from the rack.
7. Attach the chassis to the rack by installing a mounting screw through the open flange holes and rack, starting from the
bottom.
8. Visually inspect the alignment of the router. If the router is installed properly in the rack, all the mounting screws on
one side of the rack are aligned with the mounting screws on the opposite side and the router is level.
9. After ensuring that the router is aligned properly, tighten the screws.
10. After you install the mounting screws and securely bolt the chassis to the rack, reinstall the components in the chassis.
Step 4–Install the Line Cards
The line cards fall into two categories: line cards that mate with switch fabric JNP10008-SF and those that mate with
switch fabric for 14.4 Tbps line cards, JNP10008-SF3. The two types of line cards are designed to only work with the
matching type of switch fabricthat has the mating connector. You can't mix the two types of line cards in the same chassis.
See Table 1.
11