Electrical Connection - Miele EVS 6114 Operating And Installation Instructions


ATTENTION:
Before installation, servicing or repair
work, disconnect the drawer from
the domestic electricity supply by
either removing the screw-type
fuses, manually tripping the circuit
breaker or pulling out the plug. To do
this, be sure to pull the plug not the
power cord.
Unauthorized installation,
maintenance and repair work
performed by unqualified persons
could put users in considerable
danger. Miele cannot be held liable
for such work.
Installation, maintenance and repairs
must only be carried out by a Miele
authorized technician.
The connection data (voltage and
frequency) on the data plate of the
drawer must match the domestic
electricity supply in order to avoid
the risk of damage to the drawer.
Compare this data before connecting
the appliance. Consult a qualified
electrician if in any doubt.
If another appliance is connected to
the power supply in combination
with the drawer, operating both
appliances at the same time can
cause the power supply to become
overloaded.
Consult a qualified electrician if in
any doubt.

Electrical connection

Installer:
 Please leave these instructions with
the customer.
Connection
 Make sure that the connection data
on the data plate (voltage, frequency,
and fuse rating) matches that of your
domestic electrical supply.
Connection data
The drawer is ready for connection and
equipped with a 7' 2" (2,200 mm) power
cord with a plug.
120 V/15 A/60 Hz
Make sure that the connecting socket is
accessible after the installation of the
drawer.
43