Warnings and safety instructions
During installation, maintenance and repair work, the drawer must
be completely disconnected from the domestic electricity supply. It
is only completely isolated from the electricity supply when:
- the circuit breakers have been switched off, or
- the screw-type fuses have been fully unscrewed or
- the plug (if present) is removed from the outlet. To do this, be sure
to pull the plug not the power cord.
If the drawer is installed behind a furniture front (e.g. a door) do
not close the door while the drawer is in use. Heat and moisture can
build up behind the closed door. This can result in damage to the
drawer, housing unit and floor. Leave the furniture front/door open
until the sealing bar and drawer have cooled down completely.
8