Operating and installation instructions Built-in system drawer ESS 3060-10 en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time...
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
Operation Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet. How the appliance works The drawer is designed for storing crockery in only. Do not store food or drinks in it, as moisture in the food or drinks could cause corrosion damage to the drawer.
Capacity The quantity that can be loaded will depend to a great extent on the type and size of your crockery. The layouts shown here are suggestions only. The maximum load bearing capacity of the drawer is 15 kg. Combining the drawer with a CVA 3650 or CVA 3660 coffee machine –...
If not, it might become impossible to remove and could cause the outer surface to alter or discolour. Clean the front using a Miele microfibre E-cloth or with a clean sponge and a solution of hot water and washing-up liquid. Then dry with a soft cloth.
Optional accessories These can be ordered via the internet at www.miele-shop.com, or from the Miele Customer Contact Centre (see back cover for contact details) or from your Miele dealer. Anti-slip mat Anti-slip mat to keep crockery secure E-Cloth (microfibre cloth)
The drawer may only be built in in combination with the following Miele appliances: DG 3450 and DG 3460 steam ovens * Appliances with glass front / **Appliances with metal front CVA 3650 and 3660 coffee machines Building-in combinations...
Installation It is essential to read the operating and installation instructions for any other appliance fitted in combination with the drawer. The niche dimension required will depend on which appliance the drawer is combined with. The combination appliance is placed directly on top of the built-in drawer.
Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial number of your appliance, which are given on the data plate. Space in which to stick the extra data plate supplied with the appliance. Ensure that the model number is the same as the one on the front of these instructions.