Miele EVS 6114 Operating And Installation Instructions page 44

Electrical connection
Disconnecting from the power
supply

Risk of electric shock.
There is a risk of electric shock if the
drawer is reconnected to the power
supply during repair or service work.
After disconnection, ensure the
appliance cannot be switched back
on by mistake.
To disconnect the drawer from the
power supply, do one of the following
depending on installation:
Safety fuses
 Completely remove fuses.
Automatic circuit breakers
 Press the (red) test button until the
middle (black) button springs out.
Built-in circuit breakers
(Circuit breakers type B or C)
 Switch the on/off switch from 1 (on)
to 0 (off).
Ground fault circuit interrupter
(Residual current circuit breaker)
 Switch the power switch from 1 (on)
to 0 (off) or press the test button.
44