Installation - Miele EVS 6114 Operating And Installation Instructions

Installation


Risk of damaging the drawer!
The drawer has an integrated
vacuum pump which contains oil.
To prevent oil from leaking out, the
drawer must be transported and
stored in a horizontal position only.
Do not tilt the drawer and do not
stand it up on its side.
Preparing the drawer
For safe transportation, the vacuum
pump is provided with a transit device
which must be removed before the
drawer is installed. The air filter supplied
must be fitted in place of the transit
device.
There are also 2 safety screws on the
back of the drawer to prevent the
drawer from being opened
unintentionally during transportation
and when it is being removed from the
packaging.

Warning!
Fit the air filter before installing the
drawer and remove the safety
screws at the back.
Otherwise the drawer cannot be
operated and has to be taken out of
the housing unit.
Keep the transit device and safety
screws in case the drawer is
transported again.
The transit device can be secured to
the back of the drawer.
38
Fitting the air filter and removing the
safety screws
 Slide the cover to the right and
remove it.
 Pull the red transit device  upwards
and out, for example with universal
pliers.