Miele EVS 6114 Operating And Installation Instructions page 40

Installation
Installing the drawer

Danger of injury due to incorrect
installation.
The drawer is heavy and will tip
forwards when open.
Installation must be carried out by
two people.
Keep the drawer closed until it has
been fitted to the side walls of the
housing unit using the supplied anti-
tipping mechanism.
Check that the base on which the
drawer will sit is clean and level (use
a spirit level). This is important for
the appliance to function correctly.
40
Fitting the anti-tipping mechanism
 Measure the distance to the right and
left-hand side walls of the housing
unit (see illustration).
 Mark the uppermost position in the
long slot of the anti-tipping
mechanism . Make sure that the
anti-tipping mechanism is flush with
the base of the housing unit.
 Secure the anti-tipping mechanism to
the right and left-hand side walls of
the housing unit with the 4 screws
supplied ³/₁₆" x ⁵/₈" (4 x 16 mm).