Cleaning The Vacuum Adapter; Carrying Out A Drying Cycle - Miele EVS 6114 Operating And Installation Instructions

Useful tip: To make cleaning easier, the
sealing bar can be lifted out.
 Remove soiling immediately using a
solution of hot water and dish
detergent applied with a clean
sponge or use a clean, damp
microfibre cloth.
 Remove any residual cleaning agent
with some clean water.
 After cleaning, wipe the surfaces dry
using a soft cloth.

Cleaning the vacuum adapter

 Clean the vacuum adapter with a
clean sponge and a solution of hot
water and dish detergent or a clean,
damp microfibre cloth.
 Then dry the vacuum adapter with a
cloth.
 Do not use the vacuum adapter again
until it is completely dry.

Carrying out a drying cycle

When food is vacuumed, moisture gets
into the oil circulation system in the
vacuum pump. To remove the moisture
it is necessary to run a drying cycle
after a particular operating period.
The  sensor on the control panel of
the drawer lights up yellow when a
drying cycle needs to be carried out.
After the first time it lights up you can
still run another 10 vacuuming
processes. After that, the  sensor
lights up red and a drying cycle must be
carried out. The drawer will lock after
this point and cannot be used again
until drying has been carried out.
Cleaning and care
We recommend carrying out a drying
cycle before the drawer locks out.
The whole drying cycle lasts for a
maximum of 20 minutes.
25