Cleaning and care
The vacuum chamber must be free
from objects and liquid residues
when carrying out the drying cycle.
Clean and dry the vacuum chamber
as necessary.
Touch the sensor.
Close the glass lid.
The drying cycle starts. The sensor
will flash yellow throughout the entire
process.
You can cancel the drying cycle with
the sensor. If a drying cycle is
cancelled, it must be repeated after
the remaining vacuuming processes
have elapsed or when the drawer is
switched on again.
When the drying cycle has finished, a
signal sounds and the sensor goes
out. You can now use the drawer again
as usual.
26