Electrical Connection; Connection Data - Miele ESW 6380 Operating And Installation Instructions

Electrical connection


ATTENTION:
Before installation or servicing, dis-
connect the power supply by either
removing the fuse, manually "trip-
ping" the circuit breaker or unplug-
ging the appliance. Pull the plug not
the cord.
Repairs and service by unqualified
persons could be dangerous and the
manufacturer will not be held re-
sponsible.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all ap-
plicable codes and standards. Instal-
lation, repair, and maintenance work
should only be performed by a
Miele-authorized service technician.
The voltage and frequency listed on
the rating label must correspond with
the household electrical supply to
prevent appliance damage.
Check these data before connection.
Consult an electrician if in doubt.
When another appliance is installed
in combination with the warming
drawer to the same circuit, operating
both appliances at the same time
may cause an overload.
If in doubt consult a qualified electri-
cian.
Installer:
 Please leave these instructions with
the customer.
36
Connection
 Make sure that the connection data
on the data plate (voltage, frequency,
and fuse rating) matches that of your
electrical supply.

Connection data

The drawer is ready for connection and
equipped with a 2.0 m mains cable with
a plug.
120 V / 15 A / 60 Hz
Make sure that the connecting socket is
accessible after the installation of the
drawer.