Ps/2 System Setting And Configuration - Sony CDU31A Series Service Manual

2·3 PS/2 SYSTEM SETTING AND
CONFIGURATION
a. Install the SONY CDB-334 interface card in the PS/2
system.
2-3-1 Set up PS/2 System
Note: Make sure that the PC-DOS has been installed on
the hard disk.
2-3-2 System configuration
ATP SLCD Test Disk
(for ATP)
SLCD Test Disk
(for Outgoing Test)
SRV SLCD Disk
(for Function Check/
Adjustment)
Headphone
~~
SONY Test Disc (YHDS-100) (for ATP)
SONY Test Disc (YHDS-50) (for Outgoing Test)
SONY Test Disc (YEDS-18) (for Adjustment)
Fig. 2-2 ATP/Function check/Outgoing Test/Adjustment System
2-5
Connection 50P Cable
(1-696-776-11)