Table of Contents
Advertisement
4-2 BOTTOM PLATE ASS'Y REPLACEMENT
4-2-1
Removal
a.
Remove four Wave Screws (PTP 2.6xl0) with spring
washer securing Bottom Plate Ass'y. (Refer to Fig.
4-2)
b.
Lift up the Bottom Plate Ass'y as shown in Fig. 4-2.
The Bottom Plate Ass'y can be taken out.
Wave Screw
PTP2.6 x 10 w/Sprlng Washer
/ "
T
-~
/ .
Bottom Plate Ass'y
Fig. 4-2
Bottom Plate Ass'y Replacement
4.2-2 Installation
a.
Insert the Bottom Plate Ass'y to the groove of front
panel and place it to proper position. (Refer to Fig.
4-2)
b.
Secure the Bottom Plate Ass'y with four Wave Screws
(PTP 2.6xl0) with spring washer with torque force of
58.8 N•cm (6kgf•cm).
4-3 FRONT PANEL ASS'Y REPLACEMENT
4-3-1
Removal
a.
Open the Tray by inserting in the clip to opening of
Front Panel Ass'y. (Refer to Fig. 4-3 (a))
Fig. 4-3 (a) Emergency Eject
4-2
b.
Remove hooks of the tray and pull Ornamental Tray
Plate slowly up ward. (Refer to Fig. 4-3 (b))
Ornamental Tray Plate
Fig. 4-3 (b) Ornamental Tray Plate Replacement
c.
Push slightly plastic hooks located both sides and top
of Front Panel Ass'y, and pull it slowly toward you.
(Refer to Fig. 4-3 (c))
Fig. 4-3 (c) Front Panel Ass'y Replacement
4-3-2 Installation
a.
Pass the tray through the opening of the front panel,
then install the front panel by sliding hooks located on
both sides and top of Front Panel Ass'y.
Note:
Make sure that protuberances of jack and knob
properly located in the recess and opening of the
Front Panel Ass'y
b.
Hook the Ornamental Tray Plate to the Tab of the tray.
Hide quick links:
Advertisement
Table of Contents
