Safety Instructions - infaco ELECTRO’LIV E5000 Manual

SAFETY INSTRUCTIONS

CAREFUL! In order to reduce the risk of electrical discharge, injury and fire during
the use of electrical tools, please observe the following basic safety measures.
Read and follow these instructions before using the tool, and keep these safety
instructions!
For all operations other than harvesting, please disconnect plug (No.4).
Outside of harvesting operations, the ELECTRO'LIV must be stored in its packaging
tube and the battery- vest in its carrying case.
The ELECTRO'LIV MUST imperatively be disconnected at the back socket
No.4 for the following operations :
- Whilst changing a harvesting prong.
- Whilst lubricating the vibration head.
- During all maintenance or repair operations on the appliance as a whole.
Whilst the appliance is in operation, always remember to keep hands well away
from the vibration head.
Do not use the machine if you are tired or if you are feeling unwell.
Wear non-slip shoes.
Do not leave the appliance within the reach of children or visitors.
Do not use the appliance if there is any risk of fire or explosion- for
example in the presence of inflammable liquids or gas. Never carry the
charger by its lead, and so not pull on the lead to unplug it.
Keep the lead away from sources of heat, oil or sharp edges
Never use the appliance at night or in poorly lit conditions without set-
ting up extra lighting.
Whilst using the appliance, make sure you keep both feet on the ground
and stay as well-balanced as you can.
Be careful – the poles and rake are made out of carbon – a conductive
material. Do not use near electrical wires or sources.
10