Lubrication - infaco ELECTRO’LIV E5000 Manual

N°9 – Eyelet
N° 10 – Switch ON/OFF

LUBRICATION

For this operation, the ELECTRO'LIV MUST be disconnected.
Lubricate the vibration head at least once a day,
starting work.
Position the aerosol nozzle towards the ball and socket joint. Hold the aerosol
vertically, then press. Lubricate the vibration head at least once a day (this can be
carried out without any dismantling).
N°5 – Mains
connection
N°4 – Plug
N°8 – Power
cable
N°6 – Fuse
N°2 – Crocodile clips «
+ » battery
N°3 – Crocodile clips
« - » battery
in the morning before
9
N°7 – Thermal overcurrent circuit
breaker