Color profile: Disabled
To cancel Channel 16/Channel 9 communications:
Press 16/9 until previous channel setting appears.
To scan only Weather Channels 0 - 9, press WX, and then press and hold
indicator will appear on the LCD Panel, indicating Weather
To exit from Weather Scanning:
Press 16/9 to change to Channel 16/Channel 9 communications
Press WX to change to standard channel communications.
To select operation (communication and scanning) on US Channels, press
and hold WX to select the desired mode of operation. U (USA),
I (International), or C (Canadian) will appear on the LCD Panel.
Select the appropriate mode for operation.
MEM (Entering channels into Memory)
You can enter channels into memory for instant scanning at any time.When a
channel is selected for Memory Scan, the
To enter a channel number into memory, select the channel number you want
stored by pressing the CHAN Selector button up or down, and then press MEM.
In order for all functions of theMC 1010 to work properly, at least
two channel numbers must be entered into the Memory Scan
before operating the radio.
To scan channels stored in Memory Scan, press and hold STEP. In the
Memory Scan Mode, theMC 1010 scans only those channel numbers
previously entered into Memory Scan. If no channel has been entered into
Memory Scan, the error tone sounds and the LCD Panel does not change.
While in SCAN, pressing the 16/9 button three times or pressing
and holding STEP will return the radio to the last channel it was on
while in Scan mode.
Thu Jan 28 14:42:53 1999
indicator will appear on the