Download  Print this page

Operation; Manual Tuning; Instant Channel 16/Channel 9 Communications; Triple Watch - Uniden MC 1010 Operating Manual

Mc 1010 vhf marine radio
Hide thumbs

Advertisement

Color profile: Disabled
Composite
Default screen
1.
Turn the unit on by rotating the VOL control clockwise.
2.
Adjust the SQUELCH control counterclockwise until you hear background
noise, and then turn it clockwise until the noise just disappears.

Triple Watch

Triple Watch monitors Channel 16 and Channel 9 for activity every two
seconds while scanning or monitoring.
To activate Triple Watch, press and hold 16/9 until two short beeps occur.
The
indicator appears on the LCD panel, indicating Triple Watch mode is
in effect. If a signal is received on either Channel 16 or Channel 9, the radio
remains on that channel until the signal ends
Press and hold 16/9 until the tone sounds to cancel Triple Watch Mode.

Manual Tuning

To select a channel manually, press the CHAN selector buttons (up/down) to
select the desired channel. Weather channels are located on Channels 0 - 9.
Communication Channels are located on Channels 01 - 28 and 60 - 88.

Instant Channel 16/Channel 9 Communications

To access instant Channel 16 or Channel 9 communications, press 16/9. This
overrides the channel selected with the CHAN selector buttons or any
scanning activity. The Channel Display indicates the unit is on Channel 16.
Press 16/9 again to access Channel 9 communications. Press 16/9 a third
time to release the switch (Off). The transceiver will return to the channel
selected prior to accessing instant Channel 16/Channel 9 communications.
The Channel Display will indicate the selected channel.
C:...MC 1010.vp
Thu Jan 28 14:42:53 1999

Operation

8

Advertisement

loading

  Also See for Uniden MC 1010

  Related Manuals for Uniden MC 1010