Multi-Function Keys - Uniden MC 1010 Operating Manual

Color profile: Disabled
Composite Default screen

Multi-Function Keys

3. STEP - This key is used to step through the channels which are stored in
memory. When pressed and held, this key also starts and stops the
SCAN Mode.
Press STEP to step through the channels which are stored in
memory.
Press and hold STEP to begin scanning the channels in memory.
Note: Triple Watch is automatically activated when scanning
begins.
4. H/L - This key allows you to switch between high transmit power (25
watts) or low transmit power (1 Watt). Some channels may not allow high
power to be used.
5. MEM - This key enters the displayed channel into memory.
6. 16/9 - This key allows rapid access to channels 16 and 9. On the first
press, the radio will select channel 16. On the next press the radio will
select channel 9. On the next press, the radio will return to the original
channel.
Press16/9 to access instant Channel 16/Channel 9
communications.
Press and hold 16/9 to turn Triple Watch On/Off.
7. WX (Weather) - This key is used to switch between monitoring weather
channels and communication channels. This key is also used to select the
channel mode of operation.
Press WX to switch between weather and communication
channels.
Press and hold WX to select channel mode of operation.
C:...MC 1010.vp
Thu Jan 28 14:42:53 1999
7